JConcepts has the steering system on the DR10, SR10, and RB10 covered with a light-weight, aluminum steering bellcrank assembly. This servo saver-less steering system is CNC-machined and replaces the stock plastic bell-cranks. The steering bell cranks come in a blue anodized finish, sport machined chamfered silver edges, and engraved JC logos. The assembly provides a more rigid steering system with increased steering feel and response. The fit of the bellcranks has been improved to help eliminate binding when assembled.
Light-weight construction, designed with additional clearance below the drive arm to allow additional space for personal transponder or add-on weight considerations. The steering bellcranks include 2 thin crush tubes (black) which should be placed in between the bearings on the stock plastic or aftermarket aluminum steering rack. During assembly it is important to align the crush tubes into place and while securing the parts together, always use a light amount of thread locking compound on any thread which assembles into aluminum.
Light-weight construction, designed with additional clearance below the drive arm to allow additional space for personal transponder or add-on weight considerations. The steering bellcranks include 2 thin crush tubes (black) which should be placed in between the bearings on the stock plastic or aftermarket aluminum steering rack. During assembly it is important to align the crush tubes into place and while securing the parts together, always use a light amount of thread locking compound on any thread which assembles into aluminum.
Features: