Product Description
Features
- High Resolution 32-bit Programmable PWM Digital Circuit
- PWM or TTL Protocol Capability
- Magnetic Encoder Position Sensor
- Wide Operating Voltage (4.8 ~ 7.4V)
- Heavy-Duty, Long Life Motors
- 25 Tooth Output Shaft
- Customization and Modification Options Available
- Custom Connector Options Available
Parts and Accessories
- Replacement Gear Set
- Replacement Case Set
- Applicable Horns and Mounting Hardware
Programmable Functions
- End Point Adjustments
- Direction
- Fail Safe
- Dead Band
- Speed (Slower)
- Soft Start Rate
- Overload Protection
- Data Save / Load
- Program Reset
MD485HW Actuator Specifications
| Performance Specifications | |
| Control Signal | PWM / TTL |
| Operating Voltage Range (volts DC) | 4.8V ~ 7.4V |
| No Load Speed (second @ 60°) | 0.20 ~ 0.15 |
| No Load Speed (RPM) | 50 ~ 67 |
| No Load Speed (deg. per sec.) | 300° ~ 400° |
| Maximum Torque Range (oz. / in.) | 67 ~ 103 |
| Maximum Torque Range (kg. / cm.) | 4.8 ~ 7.4 |
| Maximum Torque Range (Ncm.) | 47 ~ 73 |
| Current Draw at Idle (mA) | 30 |
| No Load Operating Current Draw (mA) | 320 |
| Stall Current Draw (mA) | 1,500 |
| Physical Specifications | |
| Dimensions (inches) | 1.57 x 0.78 x 1.50 |
| Dimensions (millimeters) | 39.8 x 19.8 x 38.0 |
| Weight (ounces) | 1.59 |
| Weight (grams) | 45.0 |
| Motor Type | Cored Carbon Brush |
| Rated Motor Lifecycle | 25,000 Cycles |
| Position Sensor | Magnetic Encoder |
| Position Sensor Rated Lifecycle | 1 Million |
| Gear Material | Plastic Resin Gears |
| Bearing Type | Top Ball Bearing |
| Output Shaft (type / Ãmm) | 25 / 6 |
| Case Material | Plastic |
| Dust / Water Resistance | N / A |